LITE-CHECK Inspector 910B
Supported ABS Types

The Lite-Check 910B INSPECTOR can read the fault codes and provide troubleshooting and repair guidance for every major ABS ECU on the market.

The following manufacturers and types of ABS are supported by the LITE-CHECK Inspector 910B tester with software version 7.40 or greater:

For ABS ECU's that communicate via the 7-way connector (PLC), the 910B system will identify the manufacturer of a trailer's ABS system, present the current fault status (cab on/cab off), then display the current fault. Fault information provided by the individual ECU manufacturers is presented when the "Select" or "D" button is pressed on either the test unit or the remote control.

BLINK CODE (via 7-way)

"One-Button ABS" - Text-Based PLC (via 7-way)

MFG

ACTIVE FAULT

STORED FAULT

ACTIVE FAULTS

STORED FAULTS

Service
Guidance

Read

Clear

Read

Clear

Read

Clear

Read

Clear

Meritor Wabco

Bendix EC30-T

Bendix TABS-6

Haldex

Wabash
     



"One-Button ABS Gallery"

Information and help screen (Service Guidance) content is obtained from each of the above ABS OEMs. The LITE-CHECK process conforms to each OEM's procedure.

NOTE:  If the Inspector does not support a particular ECU, the tester display will read "NOT SUPPORTED AT THIS TIME" or "UNABLE TO DETERMINE ECU TYPE".

  Close this window