Another FIRST from LITE-CHECK
ADVANCED TRAILER ABS DIAGNOSTICS
The Advanced ABS diagnostics trailer
tester with brake and light testing
takes out the guesswork of trailer repairs.
This next generation trailer tester is easy to use by every technician within a fraction of time withclear accurate digital messages. The LITE-CHECK 3-Step ABS Process will cut ABS troubleshooting time in determining ABS problems.
The INSPECTOR 920 includes all of the PLC ABS codes dating from 2001 and with the latest Roll Stability codes eliminating multiple operations and tools in one simple process. The tester automatically identifies the ABS ECU issues and displays the necessary information to make repairs.
The INSPECTOR 920 will simplify your trailer inspections with a 4 minute walk around to check lights, brakes, and ABS operation using the LITE-CHECK Full Function Remote Control.
Check out the INSPECTOR 920 complete trailer tester incorporating TMC recommended practices and Federal vehicle requirements to meet your CSA standards.
- Full Function Remote Control
SAFEGUARDS: Firmware embedded
- Reversed polarity protection
- Shut down with high amperage and low voltage
- Anti-compound prevention locks out service air until emergency air is applied
TRAILER ABS/PLC OPERATION FOR ROAD STABILITY SYSTEMS
- Automatic ECU identification and display of PLC fault codes after 2001: BENDIX, HALDEX, MERITOR-WABCO, WABASH
- Read configuration, current & stored faults, ECU voltage, trip odometer
- Intelligent messages on new 4 line display
- 3-Step ABS Process
- Download upgrades online from LITE-CHECK
TRAILER ELECTRICAL OPERATION (with remote control)
- Display circuit voltage and amperage with condition
- Automatic fault alarm for circuit faults
- Verify lamp operation with full function remote control operation
TRAILER AIR BRAKE OPERATION (with remote control)
- Regulated emergency air application (incoming air supply normally set at 110 psi)
- Regulated service air application (internal air set at 90 psi)
- Air system leak down test
TRACTOR OPERATION
- Display tractor electrical pin output voltage
- Perform TMC Recommended Practice 137 (tractor output voltage)
- Operate truck service brakes with brake actuator and remote control
VEHICLE CABLE TEST
- Automatic displays PASS or FAIL
- Identifies crossed-wires, shorts, and opens
REQUIREMENTS
- Power: 12vdc battery or LITE-CHECK POWER SUPPLY 311R (no battery charger)
- Air: regulated filtered shop or truck compressed air supply of 120 psi
UPGRADES
- Available as a download from LITE-CHECK on line
ACCESSORIES
- Complete packages for shop and mobile operation (see at www.lite-check.com)
WARRANTY
- One year limited parts and labor. Repairs and service performed at LITE-CHECK, Spokane, Washington.
ONE TOOL, ONE PERSON, ONE PROCESS. LITE-CHECK
!!! PRESS RELEASE !!!
LITE-CHECK is introducing the next automated tester for trailer electronics and ABS called the INSPECTOR 920. With a new electronic platform, the displayed messages for circuits and ABS are faster, accurate, and more detailed on a 4 line display with millivolt and milliamp readings important for precise circuit diagnostics.
Roll Stability Control ABS codes of the three major suppliers (MERITOR, HALDEX, and BENDIX) are included in the INSPECTOR 920 software available for immediate access during the test. A simple key stroke will display ABS type, configuration, vin, current & stored faults, ECU voltage, trip odometer mileage, and clear the faults. The software includes the standard PLC ABS codes since 2001. The INSPECTOR 920 ABS codes can be upgraded with a LITE-CHECK email downloads by the shop technician.
The built-in 3Step ABS Process will cut ABS troubleshooting time by identifying circuit issues before spending time on chasing imaginary ABS problems. Circuit conditions will automatically be displayed for repair eliminating frustration and unnecessary part replacements.
The INSPECTOR 920 has the full function remote for testing brake operation and circuit operation as with the popular LITE-CHECK INSPECTOR 910B. All functions meet the TMC’s Recommended Practices for brake, lights, and ABS testing.
The INSPECTOR 920 is the ultimate solution as the ‘ONE TOOL, ONE PERSON, ONE PROCESS’ for trailer inspections and maintenance.
