Back PRO-CHECK 725
General Specifications
Model Number PRO-CHECK 725 (PC725) and PRO-CHECK 725AC (PC725AC)
Overview 12 Volt DC Output - Commercial strength utility trailer electrical tester with LITE-CHECK's direct fault identification circuitry and software
Included Test Systems Trailer electrical circuits via a 7-way flat-pin connector
Dimensions 10 1/8" x 12 5/8" x 6" (HWD)
Tester Weight PC725: 10 lbs
PC725AC: 12.5 lbs
Enclosure Durable, powder-coated aluminum (inside and outside)
Operating Voltage PC725: 12 volt DC, filtered and regulated power. (Note: 12VDC filtered power supplies and batterys work well. Do not use a battery charger as a direct electrical supply.)
PC720A5: 120 volt AC, 60 Hz. current. (Note: the PC720AC operates on AC power only)
DC Power Connection Battery clamps (PC720 only)
110-120 Volt AC Power Connection Standard three-prong grounded electrical plug (PC725AC only)
Remote Control (Optional) Full-function remote control
Electrical
Continuous Real-time Electrical Tests Active fault identification with audible alarms: direct circuit activation at the tester and via the optional full-function remote control. The electrical activity on each circuit selected is cntinously compared to the electrical activity on all of the other circuits.
All Circuit Automated Test Sequentially activates each individual circuit while monitoring the electrical activity of the other circuits. The tester then displays the results on the built-in LCD panel. Audible alarms are present during the testing process
All Circuit Load Test Allows multiple ciscuits to be made active at the same time. The trailer's cumulative current draw is displayed. Note: In this operating mode, the real-time diagnostic circuitry and software is inactive.
Direct Fault ID (default mode) Identifies OPEN SUPPLY, OPEN GROUND, SHORT, and CHASSIS SHORT via trailer connection - "Active" fault identification circuitry and software senses intermittent electrical problems, and the tester's display readings and audible alarms are updated on a real-time basis
Volt, Amperage Meters Digitally monitors tester output voltage and trailer amperage in both single and multi-circuit modes
Audible Alarm Unique alarm for each of the four fault types
Max Amperage 18 Amp maximum load (The amperage threshold for the identification of a chassis short is approximately 15 amps)
Software PRO-CHECK version 1.0.1
Electric Brake Test Activates circuit and displays amperage draw associated with the brake actuators and lamps on the circuit
Battery Test Circuit is fiirst evaluated for faults, then if no faults are detected, the teater will display the voltave of the trailer's battery