Back INSPECTOR 910B
General Specifications
Model Number 910B "Inspector"
Equipment Use Test and inspection system for heavy-duty trailers and vehicles for shop or mobile applications
Included Test Systems Electrical (lighting), Air, Air-Brake, ABS, 7-Way Cable Test
Dimensions 13.25"(W) x 12.75"(H) x 10.5"(D) (Volume = .76 cubic feet)
Tester Weight 17 lbs.
Enclosure Durable, powder-coated aluminum (inside and outside)
Mounting Options Enclosure base has 4 pre-drilled holes for easy mounting to Shop Cart or utility trailer
Operating Voltage 12Volts, filtered and regulated. (Note: 12VDC power supplies and batterys work well. Do not use a battery charger as a direct supply.)
DC Power Connection Battery clamps or ring terminal connectors
Electrical & ABS System
Electrical Tests Active fault identification with audible alarms: trailer electrical systems, ABS, 7-way Cable Test
All Circuit Test Monitors all 6 circuits on 7-Way cable: Brake, Marker, Auxiliary, Left, Right and Tail
Direct Fault ID Identifies OPEN, OPEN GROUND, SHORT, and CHASSIS SHORT via 7-way connection
Volt, Amperage Meters Digitally monitors output voltage and amperage in single and multi-circuit modes
Tractor Test Identifies "over voltage" and "under voltage" conditions that occur on the tractor's 7-way circuits
ABS Test Uses the 7-way cable to read and clear fault codes; specific troubleshooting and repair guidance. Detailed ABS fault code information along with resolution guidance directly on the tester digital display
Supported ABS Types WABCO, BENDIX, HALDEX, and WABASH
Software Upgrades Upgradeable software revisions provide the latest fault codes and ECU information
Air System
Air Tests Remotely control Air Brakes; conduct full Air Leak tests with only the Emergency Air, or both Service and Emergency; with the Brake Pedal Actuator, remotely control tractor and trailer brakes at the same time
Air Supply
 Clean, dry air at 110 to 120 psi
Delivered Service Air Internal pressure regulator provides filtered, regulated air at 85-90psi
Delivered Emergency Air 110 psi of clean, filtered and regulator air
Air Pressure Gauges Custom built air gauges with 2 psi increments allow air systms to be inspected for leaks in 60 seconds or less
Compounding Protection Computer will not allow Service Air to be applied before Emergency Air is applied
Remote Control
Remote Functions Control Emergency and Service air, and each of the six circuits on the 7-way: Brake, Marker, Aux, Left, Right and Tail
Effective Operating Dist. 100'
Power Requirements Operates on 4 AA Batteries (included)
Tester-specific Remote Each remote is keyed to the tester it is shipped with via an internal DIMM switch allowing multiple testers in the same area.